WARPING SYSTEMS
SMA21" + SMA800
Warping machine for elastic and non-elastic yarns
- Siemens S7 control system
- Powered lifting and lowering device for the in-sertion and removal of the warp beam
- Powered motion of the warp beam bearing
- Pneumatic warp beam clamping
- Expanding reed with a laying device and 9 segments in a zigzag pattern in the SMA21” and 11 segments in the case of the SMA800
- Adjustable reed traverse device with a stroke of up to 30 mm
- Leasing device
- Safety device
- Thread tension control device with negatively driven evener rollers for non-elastic yarns
- Preliminary feeder for elastic yarns
- Width-adjustable contact rollers for constant warping pressure; adjustments can be made during warping
- Antistatic device with 2 rods
- Wax or oil device
- Remote control
- Warping machine mounted on rollers
- Load measurement bar for the detection and regulation of thread tension (in combination with preliminary feeder)
| SMA 21" | SMA800 | |
| Max. warping speed for non-elastic yarns | 800 m/min. | 800 m/min. |
| Max. warping speed for elastic yarns | 450m/min | 450m/min |
| Max. beam width | 535 mm [option: 700mm] | 800 mm [option: 1000mm] |
| Max. flange diameter | 535 mm | 800 mm |